Checking The Connecting Arm And Relay Arm; Installing The Relay Arm; Installing The Rear Shock Absorber Assembly - Yamaha YZF-R1 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
• Dust seals
Damage/wear → Replace.
• Bolts
Bends/damage/wear → Replace.
EAS23260
CHECKING THE CONNECTING ARM AND
RELAY ARM
1. Check:
• Connecting arm "1"
• Relay arm "2"
Damage/wear → Replace.
2. Check:
• Bearings
• Oil seals
Damage/pitting → Replace.
3. Check:
• Collars
Damage/scratches → Replace.
EAS23270

INSTALLING THE RELAY ARM

1. Lubricate:
• Collars
• Bearings
Recommended lubricant
Lithium soap base grease
2. Install:
• Bearing "1"
• Oil seals "2"
(to the relay arm)
• Relay arm "3"
• Connecting arm "4"
email: info@motomatrix.co.uk
REAR SHOCK ABSORBER ASSEMBLY
A. Left side
B. Right side
EAS23310
INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLY
1. Lubricate:
• Collars
• Bearings
2. Install:
• Rear shock absorber assembly
NOTE:
Install the connecting arm front bolt from the
left.
3. Tighten:
• Rear shock absorber upper bracket nut
• Rear shock absorber assembly lower nut
• Relay-arm-to-swingarm nut
4-65
Installed depth "a"
1.0 mm (0.04 in)
Installed depth "b"
4.0 mm (0.16 in)
Recommended lubricant
Molybdenum disulfide grease
Rear shock absorber upper
bracket nut
92 Nm (9.2 m·kg, 67 ft·lb)
Rear shock absorber assembly
lower nut
44 Nm (4.4 m·kg, 32 ft·lb)
Relay-arm-to-swingarm nut
44 Nm (4.4 m·kg, 32 ft·lb)