Checking The Swingarm; Installing The Swingarm - Yamaha YZF-R1 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
NOTE:
Loosen the swingarm pivot shaft with the
damper rod holder (22 mm) "2".
Damper rod holder (22 mm)
90890-01365
EAS23360

CHECKING THE SWINGARM

1. Check:
• Swingarm
Bends/cracks/damage → Replace.
2. Check:
• Pivot shaft
Roll the pivot shaft on a flat surface.
Bends → Replace.
EWA13770
WARNING
Do not attempt to straighten a bent pivot
shaft.
3. Wash:
• Pivot shaft
• Dust covers
• Spacer
email: info@motomatrix.co.uk
• Washers
• Bearings
Recommended cleaning solvent
Kerosene
4. Check:
• Dust covers "1"
• Spacer "2"
• Washer "3"
Damage/wear → Replace.
• Bearings "4"
Damage/pitting → Replace.
EAS23380

INSTALLING THE SWINGARM

1. Lubricate:
• Bearings
• Spacers
• Dust covers
• Pivot shaft
Recommended lubricant
Molybdenum disulfide grease
2. Install:
• Bearing "1"
• Bearing "2"
• Washer "3"
Installed depth of bearing "a"
0–1.0 mm (0–0.04 in)
4. Dust cover
4-69
SWINGARM