Table of Contents Overview — 1 Introduction — 1 About This Manual — 1 Summary of ULT-Series Loudspeaker Features — 2 What is in the Box — 3 Getting Started — 4 Level Setting Procedure (Full-Range) — 4 Level Setting Procedure (ULT18) — 7 Hookup —...
Audio Electronics has designed ULT-series Loudspeakers utilizing high-grade components to ensure optimum performance throughout the life of your PA system. The ULT-series loudspeakers are active PA speaker systems that provide the widest horizontal dispersion in their class, thanks to the custom Pivot X110 horn.
ULT-series Overview Owner’s Manual What is in the Box What is in the Box In addition to this manual, your ULT package contains the following: • (1) ULT12, ULT15, or ULT18 Loudspeaker • (1) Locking IEC power cable...
The first tutorial covers level setting for the full-range models only; the second tutorial describes proper level setting for a system that includes one ULT18 subwoofer and two full-range ULT-series loudspeakers. Level Setting Procedure (Full-Range) With the power switch in the Off position, connect the locking IEC plug to the IEC socket connection on the back of the loudspeaker and plug it into a grounded AC outlet or surge protector.
Page 9
MIX OUT -15 +65 MIC / LINE SIGNAL CLIP TEMP Connect your line-level source (such as a PreSonus StudioLive LINE DIRECT OUT digital mixer) to the Line input. The Line input is a combo LINE LEVEL connection that accepts a balanced ¼” TRS or XLR cable.
Page 10
ULT-series Getting Started Owner’s Manual Level Setting Procedure (Full-Range) Power on your ULT-series loudspeaker. POWER 100-230V~, 50-60 Hz, 150W On/O While speaking into the microphone, use the Mic level knob to adjust the microphone level. Be sure that you are not standing directly in front of the loudspeaker while doing this, as doing so could result in feedback.
ULT-series Getting Started Owner’s Manual Level Setting Procedure (ULT18) Level Setting Procedure (ULT18) With the power switch in the Off position, connect the locking IEC plug to the IEC socket connection on the back of each loudspeaker and plug it into a grounded AC outlet or surge protector.
Page 12
ULT-series Getting Started Owner’s Manual Level Setting Procedure (ULT18) Connect Outputs 1 and 2 of your ULT18 to the line inputs of the left and right full-range loudspeakers respectively. RIGHT LEFT LINE DIRECT OUT LINE DIRECT OUT LINE LEVEL LINE LEVEL...
Page 13
ULT-series Getting Started Owner’s Manual Level Setting Procedure (ULT18) 9. Turn the line level knob on your full-range loudspeakers to the 12 o’clock position. LINE DIRECT OUT LINE LEVEL MIX OUT MIC/LINE -15 +65 MIC / LINE SIGNAL CLIP TEMP LINE LEVEL 10.
Page 14
OUTPUT LEVEL Natural Mono SIGNAL CLIP TEMP 4. The ULT-series full-range loudspeakers provide a highpass filter LINE DIRECT OUT centered at 100 Hz for bass management. Engage this filter to help create a more seamless crossover transition with your ULT18.
Direct Out. This is the Direct Out for the line input. Use this to connect DIRECT OUT to other ULT-series loudspeakers if the line level input is used only. LED Off. This button turns the front panel LED off. When the front LED is LED o off, the rear panel LED will illuminate and serve as your power indication.
Page 16
Preset Controls. Your ULT full-range speaker is equipped with three presets: • FOH. This preset is optimized for live music performance. This mode is suitable for use with PreSonus StudioLive consoles and most other mixing consoles. • Mon. Floor monitor mode sets dynamics and equalization for optimum results when the loudspeaker is used as a floor monitor.
(digital clipping), which sounds terrible. Power AC Line Connection. ULT-series loudspeakers have a universal power supply that accepts AC power input between 100 and 250 VAC at 50/60 Hz. Each loudspeaker is supplied with an IEC cord appropriate for the country of sale.
ULT-series Hookup Owner’s Manual Hookup diagrams Hookup diagrams 3.4.1 Basic Hookup Diagram Basic Hookup Diagram ULT12 Loudspeakers 18011 GRAND BAY COURT BATON ROUGE, LA 70809 USA microphone LINE DIRECT OUT LINE DIRECT OUT LINE LEVEL LINE LEVEL MIC/LINE MIX OUT...
Recognizing Problem Rooms Loudspeaker Placement and System Configuration ULT-series full-range loudspeakers are designed to reproduce an input signal with extreme fidelity, maintaining near-flat frequency and phase response at all levels up to the threshold of clipping. However, the performance of any loudspeaker will be influenced by the surrounding acoustics.
Suspension of speakers will provide even further control. Each ULT-series full-range loudspeaker features dual-position pole mounts. Using the 6˚ downward tilt mount will focus the loudspeaker’s energy onto the audience and avoid destructive reflections. This is ideal for situations...
Be sure to pay close attention to these angles when using your speakers. Rotating the cabinet changes the horizontal and vertical coverage. Both full-range ULT-series loudspeakers support rotating the horn if you would like to install them in a horizontal orientation but still maintain the 110˚ x 50˚ dispersion pattern.
High Pass Filter to reduce low energy. In some cases, this might improve intelligibility. Using the Monitor preset will also help you get the best use out of your ULT-series full-range loudspeakers in this position. 4.2.1 Stereo System A stereo system allows panning and adds depth to the acoustic image.
ULT-series Loudspeaker Placement and System Configuration Owner’s Manual Recognizing Problem Rooms 4.2.3 LCR Systems An LCR system is a stereo system with a center speaker added. This configuration allows panning and adds depth to the acoustic image. This type of system will provide more control than a basic stereo system and is ideal in situations where music and speech intelligibility are equally important.
ULT-series loudspeaker on a the SP1BK Subwoofer Pole or a speaker stand. When mounting atop a speaker stand, verify that it is rated to support the weight of your ULT-Series loudspeaker. The weight of each model can be found in Section 5.1.
Rigging and Safety This section has been created as a reference for safe rigging and mounting practices. It is not an installation tutorial. PreSonus ULT-series loudspeakers are professional products and not intended for consumer use. Installation of ULT-series Loudspeakers should only be undertaken by a qualified systems integrator or a professional rigger.
If additional pan or height adjustments are needed, make sure to follow this rule as well. SUPPORTED: Two front rigging points plus a pull-back Do not suspend any other items from PreSonus ULT-series loudspeakers. NOT SUPPORTED: One Loudspeaker attached to another...
Page 27
M10 point on the top or the side. SUPPORTED: Four Rigging Points PreSonus offers an M10 Kit that includes four (4) forged-shoulder steel M10 eyebolts. This kit is to be used with the ULT12, ULT15, and ULT18 M10 suspension points.
ULT-series Technical Information Owner’s Manual Specifications Technical Information Specifications 5.1.1 ULT12 Type Active 2-way LF Driver 12” (2.5” Voice Coil) HF Driver 1” Exit (1.75” Voice Coil) Amplifier Type Class D Total System Power 1300W Peak (650W RMS) LF Driver Power...
A cutout allows access to the handles. Order according to speaker model number. Custom Pole (SP1BK) Use the custom, threaded pole to mount a ULT-series full-range loudspeaker over an ULT18 subwoofer. Pole lengths have been measured and tested for system stability.
Technical support is available via email at techsupport@presonus.com. PreSonus telephone technical support is available to customers in the USA on Monday through Friday from 9 a.m. to 5 p.m. Central Time by calling 1-225-216-7887. Customers outside of the USA should contact their national or regional distributor for telephone technical support.
PreSonus Audio Electronics, Inc., (“PreSonus”) warrants defects in material and workmanship in PreSonus-branded products under normal use. This Limited Warranty applies only to hardware products manufactured by or for PreSonus that can be identified by the PreSonus trademark, trade name, or logo affixed to them.
PreSonus will repair or replace, at our sole and absolute option, products covered by this warranty at no charge for labor or materials. If the product must be shipped to PreSonus for warranty service, the customer must pay the initial shipping charges. PreSonus will pay the return shipping charges.
Page 33
Warranty How to Get Warranty Service (USA): 1. You must have an active user account with PreSonus and your hardware must be on file with your account. If you do not have an account, please go to: http://www.presonus.com/registration and complete the registration process.
Need help?
Do you have a question about the ULT-series and is the answer not in the manual?
Questions and answers