Product Registration PreSonus is committed to delivering the best experience for our customers. My PreSonus is a one-stop portal for all our registered customers’ needs. From your my PreSonus account, you can view all your PreSonus hardware and software registrations; contact support; track orders and more.
Connections and Controls Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Active Speaker Front Panel Owner’s Manual Speaker Connections 2.1.4 Active Speaker Passive Speaker Bare-wire connectors. This connection is used to send power and send signal to the passive Eris speaker. Be sure to connect the positive and negative connections on your active Eris speaker to the positive and negative connections, respectively, on the passive Eris speaker (i.e.
Now discoverable as “My Phone” My Devices Other Devices PreSonus Eris E3.5 BT Once your Eris speakers are paired, the Power/Bluetooth LED will illuminate white. Power User Tip: You can pair an additional device by repeating these steps. Your Eris speakers can store two Bluetooth device pairings, although audio can only be streamed from one Bluetooth device at a time.
Resources Eris®-series E3.5/E3.5 BT/E4.5/ E4.5 BT Troubleshooting Owner’s Manual Troubleshooting No power. First ensure that your active Eris speaker is plugged in. If it’s connected to a power conditioner, verify that the power conditioner is turned on and functioning. No audio. If your active Eris speaker appears to power on but you hear no sound when playing audio from your audio source (the lights are on but nobody’s home), first make sure that the cable connecting your audio source to the active speaker is working correctly.