Table of Contents
Advertisement
--- Carry out the general lubrication
--- Bleed the fuel system if required
--- Pour about 0.2 liter of motor oil into the turbocharger
housing through the pressure oil pipe connection
(models with turbo)
--- Start the engine without racing it
--- Test---run the tractor and make sure that everything
works correctly.
After a period longer than two months
--- Check the tyre/tire pressures
--- Remove the protective covers
--- Turn the radiator fan carefully forwards and backwards,
so that the sealing ring of the coolant pump works loose
(it may have stuck to the shaft).
--- Wash off any anti---corrosion oil applied to the exterior of
the tractor
--- Tension the fan belt (compression belt)
--- Remove the valve cover and lubricate the rocker
mechanism with engine lubricating oil.
--- Check the oil level in the engine and transmission, the
coolant level in the radiator and the electrolyte level in
the battery
--- Bleed the fuel system of air
--- Refit the battery (fully charged)
--- Pour about 0,2 liter of motor oil into the turbocharger
housing through the pressure oil pipe connection
(models with turbo)
--- Start the engine without racing it
--- Test---run the tractor.
---95---
I. Checks and adjustments
Advertisement
Table of Contents
