Table of Contents
Advertisement
Agroline---instrument panel (alterna-
D 2.2.2.8.
tive), LCD---display unit (2
The display has two lines.
Continuously shows a display that cannot be
1
chosen with a switch
line):
Operating hours
1.1.
The display shows the operating hours to tenths of deci-
mal accuracy. The operating hours are shown on the bot-
tom line, when the power is on and the tractor is not mov-
ing.
Driving speed km/h / miles/h
1.2.
69---25,2
When the driving speed is under 3 km/h, the symbol L is
shown in the display. The display shows up to 15 km/h to
one decimal place.
The driving speed unit (km/h / miles/h) can be changed
by an authorized workshop.
When switching the power on the operating hours are
shown first on the bottom line. When the tractor starts to
move the bottom line display changes to show the driving
speed.
D. Instruments and controls
)
.8
(two functions on the bottom
Displays chosen with change over switch
2.
(2.8.1) for LCD---display in Agroline---instrument
panel
(The top line has four basic functions, the bottom
line one function):
Functions on the top line
2.1.
69---25
By pressing the upper side of the change over switch for
LCD---display unit (2.8.1) the display changes. The
change over switch is located on the right side pillar.
Driving trip m, km/miles
2.1.1.
69---25,1
The driving trip display shows the trip up to 1 km with an
accuracy of one meter. The display shows symbol m. After
one kilometre the symbol in display changes to km and
the driving trip shows up to 100 km, to two decimals
places. After 100 km only one decimal place is shown.
The maximum display is 999.9 km.
If the driving trip unit (km / miles) needs to be changed,
please contact an authorized workshop.
Clock
2.1.2.
The clock shows hours and minutes.
---32---
2
.8.1
69---25,3
69---25,4
69---25,5
Advertisement
Table of Contents
