1. AUDIO/VIDEO SYSTEM OPERATION
INFORMATION
●Selecting "Connect Portable Player" on
the "Bluetooth*" screen also connects a
®
Bluetooth
audio player. (See page
203.)
●When none of the selectable portable
players have been registered, a screen
confirming registration is displayed. Reg-
istration method is the same as phone
registration. (See page 156.)
●When the currently connected portable
player is selected, a screen confirming
the selected player' s disconnection is dis-
played. (See page 205.)
●If connection fails once, a changing con-
nection method confirmation screen is
displayed. If connection fails 2 or more
times, a message will be displayed. When
this message is displayed, try again.
RECONNECTING THE
PORTABLE PLAYER
If the portable player is disconnected
due to poor reception from the
®
Bluetooth
network
"POWER" <"ENGINE START STOP">
switch is in ACCESSORY or ON
<IGNITION ON> mode, the system au-
tomatically reconnects the portable
player.
®
If the Bluetooth
on purpose, such as it was turned off, this
does not happen. Reconnect the portable
player manually.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
274
RX450h/350_Navi_U
when
the
device is disconnected
PLAYING Bluetooth
PLAYING AND PAUSING
®
Bluetooth
AUDIO
1
Press the "MEDIA" button if a
®
Bluetooth
audio player has already
been connected.
2
Select the "BT Audio" tab or press the
"MEDIA" button repeatedly until the
"BT Audio" tab is selected.
For the Remote Touch operation method,
see "SWITCHING BETWEEN FUNC-
TIONS" on page 216.
: Select to start playing the music.
: Select to pause the music.
: Select to start playing the music again.
Depending on the portable player that is
connected to the system, the music may
start playing when selecting
paused. Conversely, the music may pause
when selecting
while it is playing.
®
AUDIO
while it is