Lexus RX450H Navigation System Owner's Manual page 135

4
Select either
rection of the current position mark.
5
Select "OK".
 The map will be displayed.
■ TIRE CHANGE CALIBRATION
The tire change calibration function will
be used when replacing the tires. This
function will adjust miscalculation
caused by the circumference difference
between the old and new tires.
1
To perform the distance calibration pro-
cedure, select "Tire Change".
 The message appears and the quick dis-
tance calibration is automatically started. A
few seconds later, a map will be displayed.
INFORMATION
●If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
RX450h/350_Navi_U
or to adjust the di- POP-UP INFORMATION
When "Pop-up Information" is turned
on, pop-up information will be displayed.
1
Press the "MENU" button on the
Remote Touch, then select "Setup".
2
Select "Navigation" on the "Setup"
screen.
3
Select "Detailed Navi. Settings" on the
"Navigation Settings" screen.
4
Select "Pop-up Information".
5
Select "On" or "Off".
6
Select "Save".
 When "Pop-up Information" is turned off,
the following messages will not be dis-
played.
4. SETUP
3
135