2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
The Mobile Assistant feature on this
system allows the activation of Apple's
®
Siri
Eyes Free mode via the steering
wheel switches. To operate the Mobile
Assistant, a compatible cellular phone
must be registered and connected to
this system via Bluetooth
156.)
1
Press and hold the
until you hear the beeps that indi-
wheel
cate the system is listening.
2
The Mobile Assistant can be used only
when the following screen is displayed.
To cancel the Mobile Assistant, select
"Cancel", or press and hold the
steering wheel.
To restart the Mobile Assistant for addi-
tional commands, press the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice com-
mand.
RX450h/350_Navi_U
• After some phone and music commands,
the Mobile Assistant feature will automat-
ically end to complete the requested
action.
The volume of the Mobile Assistant can
be adjusted using the "PWR·VOL" knob
or steering wheel volume control
®
. (See page
switches. The Mobile Assistant and
phone call volumes are synchronized.
on the steering
INFORMATION
●The available features and functions may
vary based on the iOS version installed
on the connected device.
●Some Siri features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri will inform you
that the function is not available.
●If Siri is not enabled on the cellular phone
connected via Bluetooth
sage will be displayed on the screen.
●While a phone call is active, the Mobile
Assistant cannot be used.
●If using the navigation feature of the cellu-
lar phone, ensure the active audio source
is Bluetooth
hear turn by turn direction prompts.
on the
on the
®
, an error mes-
®
audio or iPod in order to
7
341