Lexus RX450H Navigation System Owner's Manual page 206

2. SETUP
CHANGING THE Bluetooth
SETTINGS
®
The Bluetooth
changed according to the following pro-
cedures.
■
CHANGING "Bluetooth* Power"
The "Bluetooth* Power" display shows
the following state.
When "Bluetooth* Power" is "On":
®
The Bluetooth
connected when the "POWER" <"ENGINE
START STOP"> switch is in ACCESSORY
or ON <IGNITION ON> mode.
When "Bluetooth* Power" is "Off":
®
The Bluetooth device is disconnected,
and the system will not connect to it next
time.
 The "Bluetooth* Power" auto connection
state can be set on or off.
• "On": The auto connection is turned on.
• "Off": The auto connection is turned off.
 The auto connection state cannot be
changed from "On" to "Off" while driving,
but it can be changed from "Off" to "On".
1
Select "Bluetooth* Power".
206
RX450h/350_Navi_U
®
settings can be
device is automatically
2
Select "On" or "Off".
3
Select "Save".
 In the event the state of "Bluetooth*
Power" is changed from "Off" to "On",
®
Bluetooth connection will begin.
■
EDITING THE DEVICE NAME
1
Select "Device Name".
2
Use the software keyboard to input the
device name and select "OK".
3
Select "Save".
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.