Lexus RX450H Navigation System Owner's Manual page 59

CHANGING THE STARTUP
IMAGE
When the "POWER" <"ENGINE
START STOP"> switch is in ACCES-
SORY or ON <IGNITION ON> mode,
the initial screen will be displayed.
An image can be copied from a USB
memory and used as the startup image.
(For information regarding the startup
image, see "INITIAL SCREEN" on page
32.)
INFORMATION
●When saving the images to a USB, name
the folder that the startup image is saved
to "StartupImage" and name the folder
that the screen off image is saved to
"DisplayOffImage". If these folder names
are not used, the navigation system can-
not download the images. (The folder
names are case sensitive.)
●The images file extension is JPG or
JPEG.
●The images file name, including the file
extension, can be up to 32 characters.
●Image files of 10 MB or less can be saved.
●Up to 3 images can be downloaded.
RX450h/350_Navi_U
■ TRANSFERRING DATA
1
Pull up the lever to release the lock, and
lift the armrest.
2
Open the cover and connect a USB
memory.
 Turn on the power of the USB memory if it
is not turned on.
3
Close the console box.
4
Press the "MENU" button on the
Remote Touch, then select "Setup".
5
Select "General" on the "Setup" screen.
2. SETUP
2
59