The system will connect with the phone that
was last connected, if it is nearby.
When "Display Phone Status" is set to
"On", the connection status is displayed.
(See "Bluetooth
TION STATUS DISPLAY SETTINGS" on
page 207.)
This screen appears when the Bluetooth
phone is first connected after the
"POWER" <"ENGINE START STOP">
switch is in ACCESSORY or ON <IGNI-
TION ON> mode.
INFORMATION
●It may take time if the phone connection
is carried out during Bluetooth
playback.
●Depending on the type of Bluetooth
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
RX450h/350_Navi_U
®
DEVICE CONNEC-
®
®
device
®
1. PHONE OPERATION
MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "MENU" button on the
Remote Touch, then select "Phone".
The "Phone" screen can be displayed by
pressing
on the steering wheel.
2
Select "Connect Phone".
3
Select the screen button corresponding
to the desired phone connection.
When the cellular phone' s device name has
not been able to be obtained, "Device 1" to
"Device 5" will be displayed in the order the
phones were registered.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
®
man-
4
159