Lexus RX450H Navigation System Owner's Manual page 122

3. ADDRESS BOOK
6
Scroll the map to the desired point.
"Adjust Location": Select to adjust the posi-
tion in smaller increments.
7
Select "Enter".
8
Select either
size of the area to be avoided.
9
Select "OK".
When registration of an area to avoid is

completed, the "Area to Avoid" screen will
be displayed.
INFORMATION
If a destination is input in the area to avoid
●
or the route calculation cannot be made
without running through the area to
avoid, a route passing through the area to
be avoided may be shown.
Up to 10 locations can be registered as
●
points/areas to avoid.
122
RX450h/350_Navi_U
or to change the
EDITING AREA TO AVOID
The name, location and/or area size of a
registered area can be edited.
1
Press the "MENU" button on the
Remote Touch, then select "Setup".
2
Select "Navigation" on the "Setup"
screen.
3
Select "Areas to Avoid" on the "Naviga-
tion Settings" screen.
4
Select "Edit".
5
Select the area to be avoided.