Table of Contents
Advertisement
1-7. LOUVER CONTROL
1. For Floor / Ceiling type < AB *G18LVTB, AB *G22/ 24LVTA >
(Function Range)
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
(Operation Range)
During Cooling / Heating / Dry / Fan mode :
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry / Fan mode
Heating mode
During Auto mode operation, for the first minute after the start-up, air-flow will be horizontal
; the air direction cannot be adjusted during this period.
During Cooling and Dry mode operation, if the Vertical Louvers are left in the
<Operation continues for 30 minutes>
they will automatically return to position
<Operation stops within 30 minutes>
they will automatically return to position
For the dew condensation prevention of the Vertical Louvers.
During Heating start-up and Defrost operation, to prevent the thing that
the cool air blows to the person directly, the louver is set to
1-2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
The range of swing depends on the set airflow direction.
The type of operation
Cooling / Dry
Heating
Fan(
1
4
)
to
5
Fan(
7
)
to
When the indoor fan is either at S-Low or Stop mode, the swinging operation is interrupted
and the louver stops at the memorized position.
( Stop mode means Operation stop.)
6
7
5
1
Horizontal flow
Downward flow
4
.
4
in next Cooling start-up.
Range of swing
to
1
4
3
to
7
1
to
4
to
3
7
2
3
4
5
6
7
1
7
.
1
01-11
(Fig 10 : Air Direction Range)
3
4
5
6
7
5
to
7
,
1
2
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
