Oki MC561 Maintenance Manual page 68

Oki Data CONFIDENTIAL
(4) Adjust the paper width guide to the width of paper to be loaded.
(5) Insert the paper with the print side face up until its edge touches the paper feed
entrance.
Note! When loading envelopes on the MP tray, load them face up with short edge
into the machine. The flap should come to the right side to the feeding
direction.
44473001TH Rev.1
(6) Adjust the paper width guide to hold the paper in place.
(7) Press the tray latch button.
Important • Do not load paper above the fill line.
" " mark
Register the loaded paper on the MFP .
Proceed to "Configuring the Tray Settings".
• Do not load paper of different sizes, types or weights at the same
time.
• When adding paper, remove the paper on the MP tray and straighten
the edges of both stacks of paper, and then load them again.
• Do not put anything other than paper for printing. Do not apply too
much pressure on the MP tray.
3. MFP INSTALLATION
Latch button
68 /