Oki MC561 Maintenance Manual page 203

Oki Data CONFIDENTIAL
Error (Disable to restore)
PJL Status
No.
Category
Code
1 Error 40712 1 Inspection is required.
2 %ERRCODE%: SIP Error
3
4
5
2 Error 40724 1 Please call service.
2 Scanner unit failed to detect printer
3 unit.
4
5
3 Error 40714 1 SIP Firmware Missing
2
3
4
5
44473001TH Rev.1
Error Warning Description
Indicates that the
processing of Scan Image
Processing contller was
failed.
User must turn Off/ On
the power supply, if this
status occurred.
%ERRCODE%
=1 : RAM Check Error
=2 : Illigal parameters
=3 : Memory Overflow
=4 : Scanner Receiving
Time-out
=5 : Others (Fatal Error）
Indicates that scanner
and printer is not
connected.
This message is
displayed, if the
communication between
scanner and printer units
could not be started.
User must turn Off/ On
the power supply, if this
status occurred.
Indicates that the
firmware in board can not
be detected.
PJL Status
No. Error Warning
Category
Code
4 Error - 1 Inspection is required.
2 PU Flash Error
3
4
5
5 Error - 1 Inspection is required.
2 PU Communication Error
3
4
5
6 Error 40978 1 %PUFLASH% Flash Error
2
3
4
5
7. TROUBLESHOOTING PROCEDURES
Description
It is shown that PU
firmware has booted in
Loader mode.
If initialization is
completed, it will change
to the status of no.20.
This status may
occur also in a user
environment. When it
occurs, the maintenance
by a maintenance
member is required
(equivalent to S/C).
Displays that
communication to PU
firmware failed.
This status may
occur also in a user
environment. When it
occurs, the maintenance
by a maintenance
member is required
(equivalent to S/C).
If this status occurred
during the unit initialinzing
the message is displayed
by English.
PU flush error (Error
occurs during the
alteration of PU farm or it
failed in the alteration in
PU flush of such as LED
Head information.)
%PUFLASH%
PU
TRAY2
TRAY3
DUPLEX
203 /