Table of Contents
Advertisement
Available languages
Available languages
9. Side Burner Valve Installation
a)
Insert the side burner valve into the Side
Burner Shelf Control Panel (J). Align the
screws on the valve with the large side of the
holes on the bezel. Slightly loosen the screws
without removing the screws. Slide the screws
down to the smaller holes and tighten the
screws to secure. As shown in Fig. 23.
Fig. 23.
10. Side Burner Installation
a)
From underneath the side burner remove two screws which
are assembled on the bottom of the side tube burner (W).
As shown in Fig. 24.
Fig. 24.
/
/
/
W
Open side burner lid and place the Side Tube Burner
(W) through the opening. Place the Side Tube Burner
(W) tube over the side burner gas valve and make sure
Side Burner gas valve is inserted into side burner tube.
As shown in Fig. 25.
Fig. 25.
W
22
Advertisement
Table of Contents
