Table of Contents
Advertisement
Available languages
Available languages
z_
WARNING
The location of the burner tube with respect to the orifice is vital
for safe operation. Check to ensure the orifice is inside the
burner tube before using the gas grill. If the burner tube does not
fit over the valve orifice, lighting the burner may cause explosion
and/or fire.
2. Clean any clogged ports with a stiff wire, such as an open
paper clip.
3. Inspect each burner for damage (cracks or holes) and if such
damage is found, order and install a new burner. After installation
check to ensure that gas valve orifices are correctly placed inside
the ends of the burner tubes.
Regardless of which burner cleaning procedure you use, we
recommend you also complete the following steps to help
prolong burner life.
1. Use a fiber pad or nylon brush to clean the entire outer surface
of each burner until free of food residue and dirt.
Z_
WARNING
Spiders and insects can nest inside the burners of the grill
and disrupt gas flow. This very dangerous condition could
cause a fire behind the valve panel, thereby damaging the
grill and making it unsafe for operation. Inspect the grill at
least twice a year.
BEFORE CALLING FOR SERVICE
If the grill does not function properly, use the following check list before calling for service.
You should inspect the burners at least once a year or immediately after any of the following conditions occur:
;,ir,{o]=] il =12_B
Grill won't
light when
the control
knob
is
rotated.
Burner
flame
is yellow
or orange,
in
combination
with the odor of gas.
Low heat with
knob
in "HI" position.
rlvJ -"r,_11 dllI[e] lie
Check
to see if LP tank
is empty.
Clean
wires
and/or
electrode
by rubbing
with alcohol
and clean
swab.
Wipe
with
dry cloth.
Make
sure the wire is connected
to
electrode
assembly.
Do other
burners
on the unit operate?
Check
to see if other
burners
operate.
If
so, check
the gas orifice
on the
malfunctioning
burner
for an obstruction.
Refer
to Clean
Burner
Tubes
and Burner
Ports
on page 30.
If problem
still
exists,
call 1-800-4-MY-HOME.
Is the fuel hose
bent or kinked?
Is the grill in a dusty
area?
Is there
adequate
gas supply
available?
If it is only one burner
that appears
low,
does
the orifice
or burner
need cleaning?
Is the gas supply
or gas pressure
low?
MANUFACTURER:NexgrillIndustries, Inc.14050 Laurelwood PI. Chino, CA 91710
31
Advertisement
Table of Contents
