Before First Use; Initial Cleaning; Setting The Time; Changing The Time - Electrolux EOB3400 User Manual

30 www.electrolux.com

4. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.

4.1 Initial Cleaning

Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.

4.2 Setting the time

You must set the time before you
operate the oven.
The indicator for the Time of day function
flashes when you connect the appliance
to the electrical supply, when there was a
power cut or when the timer is not set.
Press the
correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.

4.3 Changing the time

You cannot change the time
of day if the Duration
End

5. DAILY USE

WARNING!
Refer to Safety chapters.
or button to set the
function operates.
Press
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".
4.4 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
maximum temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function
maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
or
again and again until the
and the maximum
and set the
and set the