Inserting And Ejecting A Sd Card - Olympus DS-5500 Instruction Manual

Inserting and ejecting a SD card

Inserting a SD card
Insert the SD card fully into the card slot
with the card facing the direction shown
in the illustration below, until it clicks into
place.
• Insert the card keeping it straight.
Card recognition
After inserting SD card, the message
[Please Wait] will flash on the display while
the recorder recognizes the SD card.
Ejecting a SD card
Push the SD card inward to unlock it and let
it come out of the slot.
• Hold the card straight and pull it out.
Notes
• Inserting the card the wrong way or at an angle
could damage the contact area or cause the
card to jam.
• If the card is not inserted all the way into the
slot, data may not be written properly.
• When an unformatted card is inserted into the
card slot, the recorder will automatically display
the format menu options (☞ P.45).
• Use only cards formatted with the recorder
(☞ P.45).
• Never remove the card while the recorder is
operating, as this may damage the data.
• After pushing the card inward to eject it, releasing
your finger too quickly may cause the card to be
ejected unexpectedly.
• The recorder may not properly recognize the card
even when that card is compatible with it.
• The processing performance reduces in a card
when you repeat writing and deleting. In this case,
format the card (☞ P.45).
Memory card
1
EN
19