Memory Card; Compatible Cards; Inserting And Ejecting A Sd Card - Olympus DS-3500 Instructions Manual

Memory card

This recorder uses two types of memory cards:
a microSD card as internal memory, and an SD
card as additional memory.
You can remove the content recorded in both the
cards safely in case of malfunction of the recorder.

Compatible cards

The recorder supports memory card capacity from
512 MB up to 32 GB.
Cards compatibility
For a list of card compatible with the recorder,
please visit the product homepage at the
Olympus website applicable to your region
or contact your Olympus reseller where you
purchased the product.
Notes
• When initializing (formatting) a card,
confirm that no necessary data is stored on
the memory card beforehand. Initialization
completely erases the existing data on the
card.
• Cards formatted (initialized) by another device,
like a computer, may not be recognized. Be sure to
format them with this recorder before use.
• The card has a service life. When reaching the end
of its life, writing or erasing data on the card will
be disabled. In this case, replace the card.
• If you use a PC card adapter compatible with the
card to save or delete some data on the card, the
maximum recording time on the card may be
decreased. To recover the original recording time,
initialize/format the card in the recorder.

Inserting and ejecting a SD card

Inserting a SD card
Insert the SD card fully into the card slot
with the card facing the direction shown
in the illustration below, until it clicks into
place.
• Insert the card keeping it straight.
Card recognition
After inserting SD card, the message
[ Please Wait ] will flash on the display while
the recorder recognizes the SD card.
Ejecting a SD card
Push the SD card inward to unlock it and let
it come out of the slot.
• Hold the card straight and pull it out.
1
EN
15