Charging the batteries
Fully charge the batteries (approx. 3 hours*) before
use.
* This is the approximate time when charging the
rechargeable batteries from no remaining power
at the room temperature. The charging time will
be changed depending on the remaining power
and the state of batteries.
Charging the batteries directly via USB
cable
After loading the Ni-MH rechargeable batteries into
the recorder, you can charge them by connecting the
recorder with a PC or USB connecting AC adapter via
the USB cable.
• Before connecting the USB cable, exit the hold
mode (☞ P.32).
Charging by connecting to a PC via USB cable
Boot the PC.
1
2 Connect the USB cable to the USB port of
the PC.
While the recorder is in stop mode or
3
turned off, connect the USB cable to
the USB connector on the bottom of the
recorder.
• Charging is completed when battery indicator
turns to [
].
1
EN
13