Inserting And Ejecting A Sd Card - Olympus DS-5000 Detailed Instructions

Inserting and Ejecting a SD card

Inserting a SD card
Insert the SD card into the card slot in the
direction shown in the illustration until it
clicks.
This recorder uses a microSD card as its built-
in memory. The microSD card has been
preloaded. Refer to P.63 when removing or
inserting the card during emergencies.
Ejecting a SD card
Push the SD card inward once to unlock it,
and let it eject.
Recorder Card Selection
When inserting SD card into the SD card slot, the
recorder message [Please Wait] will flashes on the
LCD display for few seconds while validating the
SD card.
The recorder recording destination will be the default
location selected from the menu [Card Select] option
when available. In case the default location is not
available, the recorder will automatically change
over to the other card. When SD card selected from
the menu [Card Select] option is ejected from the
recorder, the recorder will automatically change over
the recording destination to the other card.
SD
SD Card
Selected
Notes
• Insert the card keeping it straight.
• The card stops with a click when it is inserted all
the way.
• Inserting the card the wrong way or at an angle
could damage the contact area or cause the card
to jam.
• If the card is not inserted all the way, data may not
be written to the card.
• Hold the card straight and pull it out.
• If a unformatted card is installed, the recorder will
automatically display the menu format option (☞ P.64).
• Never use any card in the recorder unless it has been
formatted on this unit (☞ P.64).
• Never remove the card while the recorder is in
operation. This may damage the data.
• Releasing your finger quickly after pushing the card
inward may cause it to eject forcefully out of the slot.
1
23