Other Information; Alarm Message List - Olympus DS-5500 Instruction Manual

Other information

Alarm message list

Message Explanation
[Battery Low] The battery power is low.
An abnormal high/low temperature was
[Cannot Charge]
detected or an error occurred during charging.
[Power Supply Error
Voltage outside of the allowable limit has been
Remove Power Plug] detected.
[File Protected]
Editing or deleting the file is not possible.
The maximum number of Index marks has been
[Index Full]
reached (max 32 Index marks per file).
The maximum number of Verbal comments
[Verbal Comment Full] has been reached (max 32 Verbal comments
per file).
The maximum number of files has been reached
[Folder Full]
(max 200 files per folder).
[Erase Error] An error occurred while erasing.
[Memory Error]
The built-in memory has a problem.
[SD Card Error] The card has not been recognized properly.
[Memory Full] No remaining memory.
There was an error while formatting the
[Format Error]
memory.
[Can't make the
system file. Connect
The management file cannot be created due to
to PC and delete insufficient space on the card.
unnecessary file]
Action
Charge or replace the batteries (☞ P.13).
Charge the batteries in an environment at
normal temperature or eliminate the cause of
the error.
Use the included AC Adapter (☞ P.17).
Unlock the file (☞ P.40).
Erase unnecessary index marks (☞ P.37).
Erase unnecessary Verbal comments (☞ P.36).
Erase unnecessary files (☞ P.29).
Erase once again. When an Erase Error occurs,
format the card (☞ P.45).
Format the built-in memory (☞ P.45).
Remove the card and insert it again (☞ P.19).
Erase unnecessary files or insert another card
(☞ P.19, P.29).
Format the memory again (☞ P.45).
Connect the recorder to a computer and delete
unnecessary files.
5
EN
55