Partially Erasing A File - Olympus DS-5500 Instruction Manual

2
EN
30

Partially erasing a file

Any unnecessary part of a file can be erased.
Playback the file you would like to
1
partially erase.
Press the ERASE button at the point you
2
2
want to start erasing.
• While playback continues, [Erase Start] will
appear on the display.
• If you press the F2 ( ) button, playback will
skip (F.Skip) to the end of the file and then
stop. In case of a Verbal comment (☞ P.36)
before the end of the file, that point will be
set automatically as the ending point of the
3
partial erase.
• If you press the F1 ( ) button, playback will
skip back (B. Skip) and restart from the partial
erase starting point.
Playback will continue until the end of the
file or until the partial erase ending point is
confirmed.
In the position you want to end partial
3
erase, press the ERASE button again.
• The erase starting point (time) set in step 2
and the ending point (time) set in this step will
be displayed alternatively for 8 seconds.
• If you let the playback continue until the end
of the file, or in case of a Verbal comment
(☞ P.36) before it, that will be considered the
ending point of the partial erase.
Erasing
DICT QP Ni
MIKE
134
/ 134
45 02
M s
01 55 25
H M s
INSERT SPEED INDEX
DICT QP Ni
MIKE
134
/ 134
45 02
M s
01 55 23
H M s
Erase start
EXIT
DICT QP Ni
MIKE
134
/ 134
45 01
M s
01 55 23
H M s
Start point
EXIT
DICT QP Ni
MIKE
134
/ 134
01 30 32
H M s
01 55 23
H M s
End point
EXIT