Olympus DS-5500 Instruction Manual page 31

Press the ERASE button to confirm the
4
erasure.
4 • The display changes to [Partial erasing !] and
erasing will start.
• When [Partial erase completed.] appears on
the display, partial erase is complete.
Notes
• If the ERASE button is not pressed within 8 seconds after the [Start point]
and [End point] are alternately displayed, the recorder will revert to stop
status.
• An erased file cannot be restored.
• The erasing process may take up to 10 seconds. Do not interrupt this
process or data may be damaged.
• Files cannot be partially erased in the following cases.
- Files are locked (☞ P.40).
- Partial erasing is not possible on parts of files with a Verbal comment on
them (☞ P.36).
- Files are inside a locked SD card.
Erasing
DICT QP Ni
MIKE
Partial
erasing !
DICT QP Ni
2
MIKE
Partial erase
completed.
EN
31