Heater Unit/Installation Kit; Foreword; General Instructions; Special Tools - Webasto Thermo Top E Installation Instructions Manual

Heater Unit/Installation Kit

Quantity Description
1 Retail accessories with desired heater control
1 Installation kit for Toyota Corolla Verso Diesel
Heater unit recommended for the respective vehicle class:
Vehicle
Compact car
Mid-size car, station wagon
Full-size car, van, offroader
The selection of the heater unit is based on the passenger compartment size of the vehicle and the
level of comfort required by the customer!

Foreword

The installation instructions apply to the Toyota Corolla Verso vehicles with a Diesel engine
- For the validity, see page 2 - from model year 2005 and later, assuming technical modifications to the
vehicle do not affect installation, any liability claims excluded. Depending on the vehicle version and
equipment, modifications may be necessary during installation with respect to these installation
instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.

General Instructions

Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring
harnesses using cable ties.
Sharp edges should be fitted with edge protectors (split-open plastic hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.
111329).

Special Tools

- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Metric thread-setter kit
Toyota Corolla Verso
Thermo Top E
Thermo Top C
Thermo Top P
Order No.:
See price list
1310307B
Heater unit
3 3