Multiple Handset Use; Handset Locator; Join A Call In Progress - AT&T CL84109 User Manual

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace any
handsets.
To start the paging tone:
• Press
INTERCOM
to start the paging tone on all handsets for 60 seconds.
INTERCOM TO: appears on the screen for five seconds
before the paging tone is sent to all handsets.
NOTE: If you press
handset, the ringer of the handset is off, but the page cycle
continues for the duration of the 60 seconds.
To stop the paging tone:
• Press PHONE/
key (0-9, *, or #) on the handset(s),
–OR–
• Press
INTERCOM
NOTE: The handset ringer volume also determines the volume of the
paging tone. If the handset ringer volume level is set to off, that handset is silent for all calls
and paging (page 14).

Join a call in progress

You can conference with another system handset or the telephone base while
on a call.
Using a cordless handset:
Press PHONE/
OFF/
Press
does not terminate until all handsets and the telephone base hang up.
Using the telephone base:
Lift the corded handset or press
Place the corded handset in the telephone base or press
up. The call does not terminate until all handsets and the telephone base hang
up.
NOTE: You can use a maximum of four cordless system handsets and the telephone base at
the same time on an outside call.
/HANDSET LOCATOR at the telephone base
OFF/CLEAR or MUTE/
,
FLASH
/HANDSET LOCATOR on the telephone base.
or
FLASH
or place the handset in the charger to hang up. The call
CLEAR
DELETE
SPEAKER, or any dial pad
SPEAKER on another cordless handset.
SPEAKER on the telephone base.
33
on a
INTERCOM TO:
MSG #
- -
SPEAKER to hang
**PAGING**