Troubleshooting - Motorola CLS1110 CLS1410 User Manual

Troubleshooting

Symptom Try This:
Recharge or replace Li Ion battery.
No Power
Reposition or replace Alkaline batteries.
Make sure Push to Talk is completely pressed while
transmitting.
Message not
Recharge, replace, and/or reposition batteries.
transmitted
Verify the transmit light is illuminated while speaking.
Verify Channel, Frequency, and Code settings are correct.
Hearing other
Frequency may be in use. Change on all radios if possible (see
noises or
conversation on
page 28 and 29).
a channel
Bandwidth does not match. For optimal audio quality when
Poor audio
communicating with _Series radios, the bandwidth of other
quality
radios should be set to 12.5 kHz, if possible.
Symptom
Limited talk
range
Message not
received
Heavy static or
interference
Keypad locked
Low batteries
36
Try This:
Steel and/or concrete structures, heavy foliage, buildings, or
vehicles decrease range (see page 22). Check for clear line of
sight to improve range.
Wearing radio close to body such as in a pocket or on a belt
decreases range. Change location of radio.
Confirm radios have the same channel, frequency, and
interference eliminator code settings (see page 26).
Recharge, replace, and/or reposition batteries.
Move to another location. Obstructions and operating indoors or
in vehicles may decrease range.
Verify radio is not in scan mode (CLS1410 only, see page 24).
Radios are too close. They must be at least 5 feet apart.
Radios are too far apart or obstacles are interfering with
transmission.
Unlock by holding for 3 seconds.
S
Recharge or replace batteries. Extreme operating temperatures
affect battery life.
35