Factory Default Settings; Entering Programming Mode; Selecting Channel; Programming Frequency - Motorola CLS1110 CLS1410 User Manual

Factory Default Settings

Your radio is programmed at the factory to the following settings:
CLS1110
Channel
1
2
3 Not available
4
Code
Call Tone/
®
VibraCall
Not available
VOX
Microphone
Gain
To restore the factory settings, turn the radio on while holding Push to Talk and
for 3 seconds.

Entering Programming Mode

Press and hold Push to Talk and
radio beeps and displays k, the channel number flashes, and the frequency
(indicated by l) and code (indicated by y) display alternately.
Note: If you press and release the Push to Talk button when programming
CSL1410 models, you will return to the front of the Programming Mode.
Selecting a Channel (CLS1410 Only)
1. In programming mode, press
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press [ or ] to select the channel.
3. Press and hold Push to Talk to exit programming mode, or
press to continue programming.
S
Programming the Frequency
1. In programming mode, press
frequency number flashes.
2. Press [ or ] to select the frequency.
3. Press and hold Push to Talk to exit programming mode, or
press to continue programming.
S
Note: See page 39 for information on frequencies for communicating with other
business radios. If you are matching your _ Series radio to an existing Spirit GT
radio, see page 45.
28
Frequency
CLS1410
2 2
8
5
6
1
Off (0)
Off (0)
2 (medium sensitivity)
for 3 seconds while turning the radio on. The
T
until the channel number flashes
S
until l displays and the
S
S
27