Programming Mode - Motorola CLS1110 CLS1410 User Manual

Skipping and Removing Channels While Scanning
Scan has two temporary features to make it easier to use.
• Scan advance
If the radio stops scanning on a channel you do not want to listen to, press ] to
resume scanning for the next active channel.
• Nuisance delete
Press and hold [ to temporarily remove a channel from the scan list. The
channel return the next time you use the scan feature.

Programming Mode

Programming mode allows you to change the following settings on your radio:
• Channel
• Frequency
• Interference eliminator code
• Call tones
• Microphone gain
• Scan list (CLS1410 only)
• Available channels (CLS1410 only)
Notes:
• To talk with someone on your two-way radio, the channel (CLS1410 only),
frequency, and interference eliminator code must be the same on both radios.
• You cannot enter programming mode while a VOX accessory is plugged into the
radio.
26
25