Answering System Mode - AT&T ATT1856 User Manual

ON/OFF
until the system
announces "The
machine is off."
- OR -
ON/OFF
until the system announc-
es "The machine is on,"
and the amount of remain-
ing recording time.
Answering system operation

Answering system mode

The answering system's default factory setting
is ON in order to answer and record messages.
You can turn the answering system off, but if you
do, the answering system will not answer calls or
record incoming messages.
To turn the answering system off
Press ON/OFF until you hear "The machine is
off." The ON/OFF will be turned off.
NOTE: If the answering system is off and
someone calls, the telephone will ring 10 times
then answer and announce "The machine is off,"
beep twice, then answer and announce "The
machine will now hang up."
To turn the answering system on
Press ON/OFF until you hear "The machine is
on," and the amount of remaining recording time.
The ON/OFF light will be turned on.
Call screening
If the answering system is on and the base vol-
ume is on, you will hear the announcement and
the incoming message when a call comes in.
Call intercept
While you are call screening, you can intercept
the call by pressing
handset.
20
SPEAKER or lifting the