Hyundai PDP306DVBT Instruction Manual page 103

ENG
You can setup above by moving Up/Down button and confirm by the right button.
Note: This machine supports SECAM system.
AUTO-SEARCH
This machine can auto-search the channels. Move Up/Down button to highlight AUTO-
SEARCH, and confirm by right button. It'll start auto-search from the current channel. The
machine will return to current channel upon search completed. To stop auto-search, press
SETUP button. Once completed, it'll save the best tuning position to channel Number in order.
SEARCH
use this item to search manually available channels. Move UP/Down to highlighting SEARCH
and confirm by right or left buttons. Unit will start searching and will display new channel when
found.
POSITION
To set your favorite channel to a specific channel number At Pre-set menu, highlight Position,
confirm by the right button. The channel no. will change upon each pressing of the right button
until your specified channel no. appeared.
Take channel no. 2. as an example.
Move Up/down button to highlight Search at Preset menu, and confirm by the right button. The
machine will start searching channels. It'll stop upon each found channel. Keep searching until
your favored channel appeared. Press SETUP button 3 times, to remove the subtitle, your favo-
rite channel will be stored to the specified channel no. 2.
BAND
You can also speed up searching by BAND button.
FINE
To improve picture and sound quality.
SKIP
To skip some channels. At Pre-set menu, make SKIP ON.
AV IN
AV IN: Go to below main menu by pressing MODE button on the left top of the machine. Move
up/down button to select AV IN.
Note: This machine has memory function. It'll auto save last mode. i.e.: If lastmode was set AV
IN, it'll enter AV IN mode when start again.
ENG - 103