IDEAL Logic SYSTEM 15 Installation And Servicing page 3

FOR aNy TEChNICaL qUERIEs pLEasE RINg ThE
IDEaL INsTaLLER hELpLINE : 01482 498704
NOTE. BOILER REsET pROCEDURE -
To reset boiler, turn mode knob to reset position and immediately turn knob back to required setting.
The boiler will repeat the ignition sequence if a heat demand is present .
DOCUMENT aMENDMENTs
Relevant Installation changes implemented in this book from Mod Level ....... a06 (Feb 14) to a07 (May 14)
Cover pages
Re-brand outer covers
page 11
Paragraph 4b updated
Ideal Stelrad Group reserve the right to vary specification without notice
Ideal Logic System -
Installation and Servicing
NOTEs FOR ThE INsTaLLER
3