Midi Transmit Settings - Yamaha PSR-S670 Reference Manual

 CHORD SYS/EX.
The "Tx" setting turns MIDI transmission of MIDI chord exclusive data (chord detect. root and type) on or
off. The "Rx" setting turns MIDI reception and recognition of MIDI chord exclusive data generated by
external equipment on or off.

MIDI Transmit Settings

The explanations here apply to the TRANSMIT page in step 4 on
be sent as MIDI data and over which MIDI channel the data will be sent.
1
Use the [1 ]/[2 ] (PART) buttons to select the part for changing transmit
settings.
You can use the [1 ] button to skip up or down through the part type (keyboard part, Multi Pad, and
Style), while you can use the [2 ] button to move up or down to the next part one by one.
The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and
CHANNEL ON/OFF display with the exception of the two parts below.
UPPER: A keyboard part played on the right side of the keyboard from the Split Point for the Voices
(RIGHT 1 and/or 2).
LOWER: A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This
is not affected by the on/off status of the [ACMP] button.
2
Use the [3 ] (TRANSMIT CHANNEL) buttons to select a channel via which the
selected part will be transmitted.
If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel—resulting in unex-
NOTE
pected sounds and possible glitches in the connected MIDI device.
NOTE Protected Songs cannot be transmitted even if the proper Song channels 1–16 are set to be transmitted.
3
Use the [4 ]–[8 ] button to determine the types of data to be sent.
1 2 3
page 82. This determines which parts will
The dots corresponding to each channel (1–16)
flash briefly whenever any data is transmitted on
the channel(s).
If "WLAN" is shown, this instrument can handle
NOTE
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When "WLAN" is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
PSR-S670 Reference Manual
9
85