Yamaha PSR-S670 Reference Manual page 67

5
Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1]–[8] buttons on the panel, then press the [4 ]
(INSERT) button to input the number. The Cursor position can be moved by using the Cursor buttons
[E][F].
[3 ]
REPLACE
[4 ]
INSERT
[5 ]
DELETE
6
Use the [6 ]/[7 ] (SEQUENCE END) buttons to determine how Registration
Sequence behaves when reaching the end of the sequence.
• STOP ................Pressing the TAB [F] button or the "advance" pedal has no effect. The sequence is
"stopped."
• TOP ...................The sequence starts again at the beginning.
• NEXT BANK ....The sequence automatically moves to the beginning of the next Registration Memory Bank
in the same folder.
7
Press the [2 ] (SEQUENCE ON) button to turn the Registration Sequence function
on.
To turn off the Registration Sequence function, press the [1 ] (SEQUENCE OFF) button.
8
Press the [EXIT] button to exit from the operation display.
After the confirmation message appears, press the [7 ] (YES) button to store the Registration
Sequence program temporarily.
NOTICE
Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you've saved it with the Reg-
istration Memory Bank file. For details of the instructions, see the section below.
7 5
Replaces the number at the cursor position with the currently selected Registra-
tion Memory number.
Inserts the number of the currently selected Registration Memory number to the
cursor position.
Deletes the number at the cursor position.
Indicates the Registration
Memory numbers, in the order
of the current Registration
Sequence.
6
PSR-S670 Reference Manual
7
67