Song Playback Related Parameters (Guide Function, Channel Settings, Repeat Settings) - Yamaha PSR-S670 Reference Manual

Song Playback Related Parameters (Guide Function, Channel
settings, Repeat settings)
The instrument has a variety of Song playback functions—repeat playback, various guide settings, etc.—
which can be accessed in the display below.
1
Call up the operation display.
[FUNCTION]  TAB [E] MENU 1  Cursor buttons [][][E][F] SONG SETTING  [ENTER]
2
Use the Cursor buttons [][] to select the page to make settings as described blow.
1 CHANNEL/GUIDE MODE/PHRASE MARK REPEAT Page
[1 ]
LEFT
[2 ]
RIGHT
[3 ]
AUTO CH SET
[5 ]/
GUIDE MODE
[6 ]
[7 ]/
PHRASE MARK
[8 ]
REPEAT
Press
Cursor
buttons
[][]
These parameters determine which MIDI channel in the Song data is
assigned to the left- or right-hand part of the Guide function and the Song
Score function.
When set to "ON," this automatically sets the proper MIDI channels for
the Right- and Left hand parts pre-programmed in the commercially avail-
able Song data. Normally, this should be set to "ON."
See page 48.
This parameter is available only when the current Song contains Phrase
Marks, which specify certain locations (of several measures each) in the
Song. When this is set to ON, the section corresponding to the Phrase
Mark (specified via the SONG CONTROL [G] (REW) and [H] (FF)
buttons) is played back repeatedly. Note that this parameter can be set
only when the Song playback is stopped.
PSR-S670 Reference Manual
3
47