Editing Data For Each Channel (Channel) - Yamaha PSR-S670 Reference Manual

2 DYNAMICS
This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics settings
are applied to each channel or all channels of the Section selected on the BASIC page.
[2 ]
[3 ]/
[4 ]
[5 ]
[6 ]
[7 ]
2
2
Press the [ENTER] button to actually enter the edits for each display.
The values which are shown in the STRENGTH, EXPAND/COMP. and BOOST/CUT parameters are
expressed as a percentage of the last set value.
After the operation is completed, "UNDO -> [ENTER]" is displayed. You can restore the original data if
you are not satisfied with the Groove or Dynamics results by pressing the [ENTER] button. The Undo
function only has one level; only the previous operation can be undone.
3
Save the edited Style (see step 8 on
NOTICE
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation.

Editing Data for Each Channel (CHANNEL)

You can edit recorded data for each channel of the current Section selected on the BASIC page or via the
panel buttons. The instructions below apply to step 6 of the Basic Procedure on
34
PSR-S670 Reference Manual
CHANNEL Selects the desired channel (part) to which Dynamics is to be applied. The
selected channel is shown at the upper left of the display.
ACCENT TYPE Determines the type of accent applied—in other words, which notes in the
part(s) are emphasized with the Dynamics settings.
STRENGTH Determines how strongly the selected Accent Type (above) will be
applied. The higher the value, the stronger the effect.
EXPAND/ Expands or compresses the range of velocity values. Values higher than
COMP. 100% expand the dynamic range, while values lower than 100% compress
it.
BOOST/CUT Boosts or cuts all velocity values in the selected section/channel. Values
above 100% boost the overall velocity, while values below 100% reduce
it.
1
2
page 27).
page 27.
4
3