Disabling Automatic Selection Of Voice Sets (Effects, Etc.) - Yamaha PSR-S670 Reference Manual

Disabling Automatic Selection of Voice Sets (Effects, etc.)

Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically
called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant
display as explained below. For example, if you want to change the Voice yet keep the same effect, set the
EFFECT parameter to OFF (in the display explained below).
1
Call up the operation display.
[FUNCTION]  TAB [E] MENU 1  Cursor buttons [][][E][F] VOICE SETTING  [ENTER]
 TAB [F] VOICE SET FILTER
1
2
Use the Cursor buttons [][] to select a keyboard part.
3
Use the [3 ]–[8 ] buttons to turn each item for the selected Part on or off.
When the button is set to ON, the corresponding parameter settings are called up automatically together
with the Voice selection. For information on which parameters are linked to each item, see below.
[3 ]/
[4 ]
[5 ]/
[6 ]
[7 ]/
[8 ]
16
PSR-S670 Reference Manual
2
VOICE Corresponds to the parameter settings of the COMMON, CONTROL-
LER, and SOUND pages.
EFFECT Corresponds to the parameter settings of 1 and 2 in the EFFECT page.
HARMONY/ Corresponds to the HARMONY/ARP page.
ARPEGGIO
3