Yamaha PSR-S670 Reference Manual page 77

3
Use the [2 ]/[3 ] buttons to select the Mater Compressor type, then press the
[ENTER] button.
Standard: Standard Compressor settings.
Lite: Light Compressor settings in which the effect is slight.
Moderate: Moderate Compressor settings in which the effect is moderately pronounced.
Dance Floor: Relatively powerful Compressor settings to emphasize lower pitches.
Punchy: Highly exaggerated Compressor settings.
4
Edit the Master Compressor.
[4 ]
TH.
(Threshold)
[5 ]
RATIO
[6 ]/
OUTPUT GAIN
[7 ]
5
Press the [8 ] (SAVE) button to save the settings as a User Master Compressor
type.
Select the destination to which the Master Compressor is to be saved, by using the [3 ]–[5 ]
buttons. If necessary, change the Master Compressor name. Press the [6 ] (RENAME) button to call
up the Character Entry window, enter the name, then press the [8 ] (OK) button. The saved Master
Compressor setting is shown on the display as described in step 2.
Determines the threshold (minimum level at which compression starts).
Determines the ratio of compression (how much the dynamic range is
compressed).
Determines the output level.
PSR-S670 Reference Manual
8
77