Table of Contents
Advertisement
No. Page
06 AUDIO 1
07 AUDIO 2
100
Menu List
Item
Settings
AUDIO OUT
CUE/EE
(F/R)
REC AUDIO OUT
EE/SAVE
AUDIO CH3/4 MODE CH1/2/SW
REAR XLR AUTO
OFF/ON
FRONT MIC REF
–60dB/–50dB/
–40dB
REAR MIC REF
–60dB/–50dB/
–40dB
HEADPHONE OUT
MONO/STREO Selects whether to make the rear earphone
REC AUDIO DELAY
OFF/1 FLD
AU REC EMPHASIS
OFF/ON
CUE REC
OFF/ON
AU REF LEVEL
–20dB/–18dB/
–16dB
AU REF OUT
0dB/+4dB/–3dB Sets the output reference level.
AU CH12 AGC MODE MONO/STREO Selects whether to perform automatic input
AU CH34 AGC MODE MONO/STREO Selects whether to perform automatic input
AU AGC SPEC
–6dB/–9dB/
–12dB/–15dB/
–17dB
AU LIMITER MODE
OFF/–6dB/
–9dB/–12dB/
–15dB/–17dB
AU OUT LIMITER
OFF/ON
Description
Selects the audio output signal during FF/
REW.
CUE: Cue audio signal
EE: Input signal
Selects the audio output during recording.
EE: Outputs the E-E sound
SAVE: Enters in the SAVE mode
Selects the sources to be recorded to channels
CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-
3/CH-4 switches.
Turns the XLR connection automatic
detection on or off.
Sets the reference level of the front
microphone.
Sets the reference level when the AUDIO IN
CH1 or CH2 connector is set to MIC.
monaural or stereo.
Specifies the audio recording phase.
OFF: Record at the same phase as video.
1 FLD: Delay by one frame with respect to
the video.
Turns the emphasis function on or off.
Turns cue audio recording on or off.
Sets the audio input reference level.
level adjustment of analog audio signals to be
recorded on channels 1 and 2 independently
for each channel, or in stereo mode.
level adjustment of analog audio signals to be
recorded on channels 3 and 4 independently
for each channel, or in stereo mode.
AGC saturation level setting.
For manual audio input level adjustment,
selects the limiter saturation level for loud
input signals.
Turns the audio output limiter on or off.
Advertisement
Table of Contents
