Setting The Rec-Pause Stand-By Off Timer - Sony HDW-650 Operation Manual

Setting the Rec-Pause
Stand-by Off Timer
The VTR SAVE/STBY switch allows you to
select the VTR power mode during pauses in
recording or when the unit is stopped.
Standby mode (with the VTR SAVE/STBY
switch set to STBY) allows you to protect the tape
and recording heads. You can also set up the unit
in such a way that it switches from standby mode
to power saving mode when the tape does not run
for a specified time. This setting is made on the
CAM CONFIG 1 page of the MAINTENANCE
menu.
1
Display the CAM CONFIG 1 page of
the MAINTENANCE menu.
M12 CAM CONFIG 1
REC TALLY BLINK :
REC START BEEP
SUB LCD MODE SEL: TIMER
SUB LCD TIMER
SHOT TIME DISP
VIDEO OUT (F/R) :
STBY OFF TIMER
STOP KEY FREEZE :
EMERGENCY EJECT :
TAPE LED BRIGHT :
2
Turn the MENU knob to select STBY
OFF TIMER, and press the MENU
knob.
3
Turn the MENU knob to select OFF in
order not to enter in the VTR SAVE
mode, or select the desired time to enter
the VTR SAVE mode, then press the
MENU knob.
The time changes in the following sequence:
60MIN y 30MIN y 10MIN y 5MIN
y OFF.
TOP
ON
: OFF
: 1H
: MD:HM
EE
: 60MIN
OFF
OFF
HIGH

Setting the Rec-Pause Stand-by Off Timer

79