Presentation Mode Session Timeout - Motorola Symbol MS4404 Integration Manual

Presentation Mode Session Timeout

Parameter # F0h, 90h
To set the duration of the attempt to decode a bar code detected in presentation mode, capture the bar code below.
Next, capture three numeric bar codes from
that represents tenths of a second. Single digit numbers must have a leading zero. For example, to set 0.5
seconds, capture the bar code below, then capture the 0, 0, 5 bar codes. To correct an error or change the
selection, capture Cancel on page
Appendix D, Numeric Bar Codes
D-3. The default value is 2 seconds.
Presentation Mode Session Timeout
User Preferences 6 - 11
to select a value between 1 and 255