2 - 2
Symbol MS4404/MS4407 Integration Guide
Mounting
There are two mounting holes (threaded inserts) on the bottom of the Symbol MS440X chassis.
The following figures provide mounting dimensions for the MiniScan housings. For a mounting template, see
Chapter 13, Mounting
NOTE Use only non-magnetic M3x.5 screws with a maximum length of 3.6mm to mount the MiniScan imager
chassis.
Symbol MS440X Mounting Dimensions
Note: Dimensions are
in inches [mm]
Symbol MS440X Mounting Dimensions
Figure 2-1
Template.
Exit Window