Imaging Sequence Examples; Errors While Imaging; Symbology Parameter Defaults - Motorola Symbol MS4404 Integration Manual

11 - 2 Symbol MS4404/MS4407 Integration Guide

Imaging Sequence Examples

In most cases, capturing one bar code sets the parameter value. For example, to transmit bar code data without
the UPC-A check digit, simply capture the Do Not Transmit UPC-A Check Digit bar code under
Check Digit on page
parameter entry.
Other parameters, such as Set Length(s) for D 2 of 5 require capturing several bar codes. See the individual
parameter, such as Set Length(s) for D 2 of 5, for this procedure.

Errors While Imaging

Unless otherwise specified, to correct an error during an imaging sequence, just re-capture the correct parameter.

Symbology Parameter Defaults

Table 11-1 lists the defaults for all symbologies parameters. To change any option, capture the appropriate bar
code(s) provided in the Symbologies Parameters section beginning on
NOTE See
Symbology Default Table
Table 11-1
Parameter
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
11-14. The imager issues a fast warble beep and the LED turns green, signifying a successful
Appendix A, Standard Defaults
page
for all user preferences, hosts, and miscellaneous default parameters.
Parameter
Default
Number
01h Enable
02h Enable
0Ch Disable
04h Enable
03h Enable
53h Disable
10h Ignore
F1h 43h
F1h 44h
50h 10
28h Enable
29h Enable
Transmit UPC-A
11-7.
Page
Number
11-7
11-7
11-8
11-8
11-9
11-9
11-10
11-13
11-14
11-14
11-15