6 - 2
Symbol MS4404/MS4407 Integration Guide
NOTE Most computer monitors allow capturing the bar codes directly on the screen. When capturing from the
screen, be sure to set the document magnification to a level where the bar code can be seen clearly, and
bars and/or spaces are not merging.
To return all features to default values, capture
bar code menus, default values are indicated with asterisks (
Imaging Sequence Examples
In most cases, capturing one bar code sets the parameter value. For example, to set the beeper tone to high,
capture the High Frequency (beeper tone) bar code listed under
fast warble beep signal and a good decode LED signal, signifying a successful parameter entry.
Other parameters, such as Presentation Mode Session Timeout, require capturing several bar codes. See these
parameter descriptions for this procedure.
Errors While Decoding
Unless otherwise specified, to correct an error during a decoding sequence, just re-capture the correct parameter.
*
*
Indicates Default
Set Default Parameter on page
*
).
High Volume
Feature/Option
(00h)
Option Hex Value for programming
via SSI command
Beeper Tone on page
6-3. Throughout the programming
6-4. The imager issues a