Polaris Ranger RZR 800 Manual page 360

ELECTRICAL
Clock
The clock displays the time in a 12-hour or 24-hour format.
Refer to "Units of Measurement" to change the format
(Standard 12-hour / Metric-24 hour). To set the clock, follow
these steps:
1. Toggle the MODE button until the odometer is displayed.
2. Press and hold the MODE button until the hour segment
flashes. Release the button.
3. With the segment flashing, tap the MODE button to
advance to the desired setting.
4. Press and hold the MODE button until the next segment
flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10 minute and 1 minute
segments. After completing the 1-minute segment, step 4
will save the new settings and exit the clock mode.
10.12
Units of Measurement
Standard Display
Distance
Miles (MPH)
Time
12-Hour Clock
Temperature Fahrenheit
To change between Standard and Metric units of measurement,
follow these steps:
1. Turn the key to the OFF position.
2. Press and hold the MODE button while turning the key to
the ON position.
3. When the display flashes the distance setting, tap the
MODE button to advance to the desired setting.
4. Press and hold the MODE button to save the setting and
advance to the next display option.
5. Repeat the procedure to change remaining display settings.
Metric Display
Kilometers (KM/H)
24-Hour Clock
Celsius