Battery Installation; Battery Removal - Motorola II Operating Instructions Manual

Battery Installation

1. Turn off the radio and hold it with the back of
the radio facing up.
2. Place the two notched tabs of the battery
(located at the inside base of the battery) into
the metal cutouts of the radio (located at the
inside base of the radio).
3. Rotate the battery toward the radio and press
the top of the battery into the radio until both
battery release levers "click" into place.
Note: The batter y is shipped uncharged.
Batteries must be charged before use. (See
"Battery Information" section.)

Battery Removal

1. Turn off the radio and hold it so that the battery
side of the radio is tilted down.
2. Press down on the two battery release levers.
3. With the release levers pulled down, the top of
the battery will come apart from the radio.
4. Remove the battery completely away from the
radio.
6 Getting Started (cont.)
REQUIRES:
MAEPF-22058-B