Getting Started; Battery Installation; Battery Removal - Motorola LTS 2000 User Manual

4

Getting Started

Battery Installation

1. Hold the radio with its back facing
you (knobs turned upwards).
2. Hold the battery with its name
plate facing you.
3. Insert the projected upper end of
the battery into the cut openings
located at the lower end of the
radio, and slide the battery to the
top of the radio until the battery
clicks into place.
Note:
The battery is shipped uncharged.
Batteries must be charged before
use. (See "Battery Information"
section).

Battery Removal

1. Turn off the radio and hold it so
that the battery side of the radio is
tilted down.
2. Press the battery release lever.
3. With the release lever pressed,
gently slide out the battery.