Table of Contents
Advertisement
35
General Radio Features Operation
(cont.)
Programming the Radio's Lists
Programming the Telephone List Numbers
(MTS 2000 III Model Only)
This feature lets you use the radio's keypad to
change the telephone numbers assigned to any of the
telephone list members. Each phone number can have
up to 16 digits. Only the numbers can be changed from
the keypad; to change the names of the members, the
RSS must be used.
1.
To change the telephone list, press the right arrow
key (
) until "PROG" appears on the display.
2.
Press the key below "PROG." The display changes
to show the types of lists (phone, call, etc.) that
can be programmed.
3.
Press the key below "PHON." The display shows
the first programmable member of the telephone
list and the programming mode status annunciator
flashes, indicating that the radio is in the program
mode. The programming mode annunciator will
continue flashing while the radio is in the program
mode.
4.
To move around in the telephone list, press either
the right (
) or the left (
arrow key will take you for wards to the next
member of the list; the left arrow key will take you
backwards to the previous member of the list. You
can also use the keypad to enter the desired
member's position number (any programmed
location from 1 through 19) in the list to go directly
to that member.
5.
When you stop on a member of the list, the display
will alternate between showing the member's name
and telephone number.
) arrow key. The right
3
1
2
AB C
D E F
4
5
6
GHI
JKL
MNO
7
8
9
P R S
TUV
W X Y
0
HOME
1
2
3
AB C
D E F
1
2
3
AB C
D E F
HOME
Hide quick links:
Advertisement
Table of Contents
